Are There Installation Instructions Available for the Phoenix Faucets Spout Nut Assembly

Question

Question:

Are there instructions for installation for kitchen faucet available?

asked by: Eileen S

0

Expert Reply:

I contacted the manufacturer about installation instructions for the Replacement Spout Nut Assembly for Phoenix Faucets # PF281030. They did not have installation instructions but were able to provide me with a diagram that shows the order the parts are assembled in. They also noted that the snap ring has a tapered side that goes down into the faucet.

expert reply by: Scott S

0

Phoenix Faucets Diagram
(click to enlarge)

Shawn

6/12/2024

Isn’t #11 just a standard oring?

Bryce D.

6/12/2024

@Shawn No, #11 is a 1/2" plastic lock nut.

Shawn

6/12/2024

@BryceD Mine has a plastic split ring that’s looks like #10 and below that (#11), mine is a rubber ring

Bryce D.

6/12/2024

@Shawn That's interesting, I'd assume it's just a standard O-ring then.

See All (5) Replies to Shawn ∨

Answer 1

Hello Robert. I was able to cross reference the part number you provided to the Bargman #59 Series clearance lights. These lights have unfortunately been discontinued, so a direct replacement is not available. We do have a light that is virtually…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Are There Installation Instructions Available for the Phoenix Faucets Spout Nut Assembly

Product Page this Question was Asked From

Continue Researching