Recommended Hitch and Wiring Harness for a 2021 Jeep Grand Cherokee
Published 10/27/2021 >
Products Featured in This Question
Question:
I have a 2021 Jeep Grand Cherokee without a towing package. I would like to add a trailer hitch, 7-way wiring harness, and brake controller to my Jeep.
asked by: Rita
Expert Reply:
I have a great towing setup for your 2021 Jeep Grand Cherokee. You're going to need a hitch receiver, wiring harness, brake controller, and ball mount. Let's start with the hitch receiver. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT38MR. This is a custom fit receiver that mounts to your Jeep with included hardware that requires no welding or drilling into your frame. It has a maximum gross trailer weight of 7,500 lbs and a maximum tongue weight of 900 lbs. This is the maximum capacity of the hitch you will need to check your owner's manual to confirm your vehicle's towing capacity.
You're going to need two separate wiring harnesses to have a 7-way vehicle connecter. The first is Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118727. This T-One connector plugs directly into the existing wiring harness behind your tail lights. It requires no cutting or splicing of wires and its powered ModuLite reduces strain on your Jeeps wiring system.
The second harness you will need is the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it. You will then connect one wire to the blue wire on the brake controller and then connect one wire to the positive post on the vehicle's battery via the included 40-amp circuit breaker. This will provide you with the ability to control your trailer's brakes and also provide you with a 12v power wire for you trailer's accessory lights.
To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" Ball, a fixed ball mount with a 3/4" rise and 2" drop, and is rated for up to 7,500 lbs. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
- Trailer Hitch
- For Towing
- Class IV
- 900 lbs TW
- 7500 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 1125 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Hidden Trailer Hitch Recommendation for 2020 Dodge Durango
- Article: Trailer Wiring Diagrams
- Q&A: Does the Blue Ox Trailer Hitch BLU46HR Fit a 2-Row 2025 Jeep Grand Cherokee L?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch and Wiring for 2018 Dodge Durango without Tow Package
- Q&A: Recommended Hidden Trailer Hitch and Vehicle Wiring Harness For 2021 Dodge Durango
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What Hitch and Wiring do I Need for My 2021 Jeep Grand Cherokee Laredo X?
- Q&A: Will Draw Tite DT38MR Fit 2015 Grand Cherokee Without Removable Fascia Cover?
- Q&A: Best Hidden Trailer Hitch Recommendation for 2019 Dodge Durango
- Article: Trailer Hitch Installation Tips
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch



