Could Saris Freedom Tilt Adapter be Used to Adapt Spare Mount to Hitch

Question

Question:

i can convert Saris Freedom Bike Hitch and Spare Tire Car Rack Mount, 2 Bicycle Carrier withTilting Base for Saris SuperClamp Hitch Racks - 2inch Hitches Thanks

asked by: Tuyen N

1

Helpful Expert Reply:

There isn't a way to convert the Saris Freedom bike rack that attaches to rear spares to a hitch mount. The # SAR56VR is not capable of that. You're only option would be the Freedom that fits hitches part # SA4412B instead.

expert reply by: Jameson C

1

Answer 1

For a solution that will avoid any incurring costs of buying another bike rack, I recommend the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches #Y02483. With the Yakima BackSwing, you can mount your WestSlope 3 #RKY10223…

view full answer...

Answer 2

If you're trying to make a Saris SuperClamp #SA4026F or #SA4025F into a tilting rack with a 2" receiver on your Subaru Outback you're going to need the Tilting Base for Saris SuperClamp Hitch Racks - 2" Hitches #SAR56VR. I'm not…

view full answer...

Answer 3

The Tilting Base for Saris SuperClamp Hitch Racks item #SAR56VR does not come with a locking screw and nut. You will need to purchase the replacement Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks item #SA3021. If you would like an anti rattle…

view full answer...

Answer 4

Hello Matthew. It is possible to add an outlet to the bed of your truck. To add 12V outlets to the bed you can use the Roadmaster #RM-9332 and run the wiring up to the battery using 12 gauge wire. If you are wanting to add a 7-way trailer connector…

view full answer...

Answer 5

Hey Hadiya! No, the Curt E16 5th Wheel Hitch w/ S20 Slider for Ram #C85PV will not give you enough clearance to maneuver the Layton Skyline 5th wheel with your 2021 Ram 1500 with a 5-1/2' bed. This unit only moves you 12" back from the…

view full answer...

Answer 6

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Answer 7

Sergio, yes, the PullRite SuperGlide part #PUL63RR will work with your MORryde cushioned pin box like part #MR55QR. you will just need to pair it with the PullRite SuperGlide Quick Connect Capture Plate part #PUL76RR for the setup to function…

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 10

I have a solution to help with the chucking that you are experiencing as there is not a Reese Goosebox that fits the same bolt pattern used by the Leland 7920 Pinbox. The bolt hole spacing on your pin box is different vertically and horizontal from…

view full answer...

Answer 11

Hi Chis yes, the PullRite SuperGlide #PUL93RR will work with your 2024 Ford F-250 short bed. This hitch will work with any industry standard rails, so as long as you have a set of those you'll be good to go. If you don't have any rails, then…

view full answer...

Answer 12

Hey Jerry, thanks for reaching out! I recommend picking up the PullRite SuperGlide #PUL63RR and pairing it with the PullRite Base Rail Kit #PUL77RR. This kit comes with custom brackets so you aren't drilling into your truck frame, and the hitch…

view full answer...

Could Saris Freedom Tilt Adapter be Used to Adapt Spare Mount to Hitch

Product Page this Question was Asked From

Continue Researching