How to Determine Fit of Road Armor Shock Absorbing Equalizer

Updated 09/30/2021 | Published 09/29/2021

Question:

Road Armor Shock Absorbing Equalizer. I have a 2015 Wildcat 333MK. Not sure of the axle weight/size. i DO NOT want to change my height of my trailer any, if possible. Center Hub to Hub is 32-1/2. Shackles are 2-1/4 inch center to center, 3-1/2 inch overall. Not sure of the bolt size. I would like the complete set up. Road Armor Suspension blue and Wet Bolts and shackles. Can you give me P/N and Prices for the correct items needed.

asked by: William J

Expert Reply:

What you'll need to do is measure your equalizers in order to determine the fit of the Road Armor Shock Absorbing Equalizer Kit # LC696740.

I have added a photo below that shows the measurements of the equalizers (please note that even though the equalizers shown in the dimensional photo are yellow, this is the correct measurement for the blue Road Armor equalizers), and yours will need to match or be very similar in order to maintain the same ride. The # LC696740 equalizers have mounting holes 6 inches apart on center and it is 3-1/2 inches from the center to the top mounting hole.

If your equalizers match that you can use this kit, and the correct mounting hardware for the Road Armor is the Lippert AP Kit - Tandem Axle Road Armor Wet Bolts and Shackles # LC52SV.

Should you have different dimensions for your equalizers, please let me know and we'll see if we can find a better solution for you.

expert reply by: Kyle S