How To Determine The Correct Vent Lid Replacement

Question

Question:

Hi, Im need to replace a vent lid on the roof of our motorhome and Im struggling to find the proper fit/style to put up there. We have a 2005 Monaco Esquire motorhome and the vent lid we need to replace is above the bathroom. Can you help point me in the right direction. Ive already bought the wrong vent lid 2x. Your help is appreciated. Thanks!

asked by: Jamie T

0

Expert Reply:

To determine the correct cover, you will need to measure the vent opening. The most common openings are 14 1/4" x 14 1/4", and have vents that are 14" x 14".

After you make your measurements, you will need to determine what type of hinge you have. There are three types of hinges, a 3 point hinge, a 4 point hinge and a rolled or continuous hinge. Based off the picture you have provided, it appears you have a rolled hinge so your correct replacement is the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent # BVD0449-A03.

expert reply by: Bryce D

0

3 Hinge Types
(click to enlarge)

Rolled Hinge
(click to enlarge)

Answer 1

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008, please…

view full answer...

Answer 2

Thank you for the detailed description of the replacement vent lid you need for a motorhome's 14 x 14-inch roof vent that uses a continuous hinge. We offer complete vent assemblies but also just the lids too, and in most hinge styles, including…

view full answer...

Answer 3

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 6

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 7

Hey David, it is very possible to replace the Dometic RV AC units you have now with the Furrion Chill Cubes you mentioned but you would need to replace all parts of the system as none of what you have can be reused with the Cubes. So you would need…

view full answer...

Answer 8

Hey Eli! The Advent Air RV Air Conditioner System #ADV92SR you ordered is not compatible with a Dometic Duo Therm. However, it really doesn't matter. This is a new R32 refrigerant unit so it won't be backwards compatible with any of the old…

view full answer...

Answer 9

Hi Shawn! You're dealing with a common issue when installing a MaxxAir II cover #MA76JR on a MaxxFan 4751KS, like the #MA00-04751KSX. Here’s the situation you're running into: -First, the MaxxFan lid opens almost vertical when fully opened…

view full answer...

How To Determine The Correct Vent Lid Replacement

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching