Replacement 20000lb 5th Wheel Hitch Head For Pro Series 20000lb 5th Wheel Hitch

Question

Question:

Do they make a replacement head for the 20k fifth wheel hitch assy?

asked by: Nils W

0

Expert Reply:

Thanks for the picture!

The correct replacement 20000lb 5th wheel hitch head for your Pro Series 5th wheel hitch is the # 30118.

This will be an exact replacement for your damaged 5th wheel head.

I included a video of the # 30118 for you to take a look at.

expert reply by: Samuel C

0

Customer Picture
(click to enlarge)

Answer 1

Thanks for sending a picture! It really helps! Yes, you can upgrade your head assembly on your Reese 16K slider hitch. I recommend the Reese replacement double pivot 20K head and head support #30118 as it will work with your current Reese Kwik-Slide.…

view full answer...

Answer 2

Yes, the Reese 20K Head #30118 will fit the Base Legs #RP30727 you have on the Reese 5TH Wheel Hitch #RP30047. You will need to use the Wedge #SWW-03 with the Reese Sidewinder 20K Pin Box.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement 20000lb 5th Wheel Hitch Head For Pro Series 20000lb 5th Wheel Hitch

Featured Help Information

Miscellaneous Media

Continue Researching