Determining Correct Bearings for Wells Cargo Trailer
Published 09/09/2021
Products Featured in This Question
Question:
I have a 2000 Wells Cargo Enclosed trailer. I am looking for new bearings. The bearing I pulled out are totally shot and I cannot see any #s on them. Model#CW1622-102 Can you tell me what bearings go in it? Also need the dust cap or whatever the cap on the end is called.
asked by: Jim W
Expert Reply:
Since you are unable to find any part numbers on your bearings you are going to need to take measurements to find the correct size. I recommend using a digital caliper like the # PTW80157.
You will need to measure the inner and outer bearing seat on your spindle. Once you have the measurements you will be able to determine the correct bearings. For a standard grease cap you will also need to measure the inner diameter of your hub.
I have attached a helpful diagram that shows where the measurements need to be taken for your bearings. I also attached a helpful article on replacing bearings, races and seals as well as a link to our available bearings and standard grease caps.
(click to enlarge)
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Bearings and Seal for a 3,500 lb Dexter Torflex Axle
- Video: Bulldog Trailer Jack BD018564 Review
- Video: A Closer Look at the Bearing Buddy Bearing Protectors
- Video: In-Depth Review of the Trailer Hub Grease Cap with Rubber Plug, 2.72"
- Video: What to Know About the Bearing Buddy Bearing Protectors
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Video: A Closer Look at the Curt Trailer Coupler Lock Kit
- Video: In-Depth Review of the DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug
- Shop: Round A-Frame Trailer Jack - Topwind - 15" Travel - 3,000 lbs
- Shop: Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers - Key 316
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Trailer Hub Grease Cap with Rubber Plug, 2.72" - Drive-In for EZ Lube Axles - Qty 1
- Shop: Bearing Buddy Bearing Protectors - Model 1968SS - Stainless Steel (Pair)
- Shop: Curt Trailer Coupler Lock Kit - 1-7/8, 2, and 2-5/16 Couplers w/ Hitch Lock
- Search Results: trailer bearings races seals caps
- Search Results: 1781 inch trailer bearings races seals caps
- Search Results: spindle nut
- Search Results: 1375 inch id trailer bearings races seals caps
- Search Results: lubricants sealants adhesives
- Q&A: Can Brakes be Installed on Only One of the Axles of a Tandem Axle Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Disc Brakes for 2006 McClain (MCCL) Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
on Trailer Bearings Races Seals Caps
