Troubleshooting Roadmaster Invisibrake System Pulsing with Flashers 5 Times and Stopping

Updated 09/02/2021 | Published 08/31/2021

Question:

I have installed the system on an 2011 jeep wrangler unlimited and it works as it should. but if the 4 way flashers are on and the brakes are applied the system continues to pulse with the flashers after the brake is released. It seems to pulse 5 times and stops. is this normal and ok to use. Thank you

asked by: Richard F

Expert Reply:

Yes. This is the normal occurrence when using the flashers in conjunction with your Roadmaster InvisiBrake Supplemental Braking System # RM-8700. Once the system goes through this sequence your vehicle's lights and brakes will work correctly.

I confirmed this information with my contact over at Roadmaster and this is how the system was designed.

expert reply by: Erik B