Maximum And Minimum Heights Of CE Smith 11" Bolster Assemblies On 3" Crossmembers

Updated 08/26/2021 | Published 08/25/2021

Products Featured in This Question

CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4

(652)

$75.36

CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4

(396)

$61.19

CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair

(806)

$87.46

Question:

With 11 inch bunk brackets, what is the minimum and maximum height above the cross members? I need to know this in order to clear the bumpers. Thanks

asked by: Frederick W

Expert Reply:

I took the following measurements for the CE Smith Bolster and Swivel Bracket Assemblies # CE10001G-4 and the CE Smith U-Bolts # CE15283GA-4 that would fit a 3" crossmember.

From the top of the swivel bracket to the inside of the U-bolt(top of crossemember) at its highest point it is 5-7/8".

From the top of the swivel bracket to the inside of the U-bolt(top of crossemember) at its lowest point it is 3-1/2".

You will need to add in the height of your Bunk Boards # CE27840 and/or Roller Bunks # DL21755 that you intend to mount on your trailer.

expert reply by: Bud M