How To Prevent Tailgate From Hitting Jack On a Trailer While Lowered

Updated 08/24/2021 | Published 08/23/2021

Products Featured in This Question

Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs

(3989)

$54.25

Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW

(532)

$206.56

Question:

Can you lower a pickup tailgate without the tailgate hitting the top of Jack?

asked by: John M

Expert Reply:

In most cases, the tailgate will hit the jack on an a-frame trailer when lowered but there are many variables to this that are different for each truck or trailer. If you use an extended length ball mount like the Curt Ball Mount for 2" Hitches part # D-28 or an extended length weight distribution shank if using a extended length weight distribution system like the Equal-i-zer Weight Dist Shank part # EQ90-02-4500, then you should be able to lower the tailgate without hitting the jack but you'll want to measure first to be sure. This will be the same for pretty much any a-frame trailer jack.

If you need a different ball mount please just let me know your rise/drop requirements.

expert reply by: Conner L