Availability of 2-Inch Hi-Rise Hitch Ball with 2-Inch Rise and 3/4-Inch Diameter Shank

Updated 05/14/2013 | Published 05/08/2013

Products Featured in This Question

1-7/8" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 3,500 lbs

(3909)

$21.84

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

(2336)

$35.60

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs

(343)

$36.80

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2948)

$3.38

Question:

I need a hitch ball that is 2inch diameter, 2inch rise and 3/4 shank. Do you make one. Thanks

asked by: George P

Expert Reply:

We offer a range of hi-rise hitch balls but none has a 3/4-inch diameter shank; all are 1-inch or 1-1/4-inch diameter. You can instead use a ball mount with the equivalent rise to accomplish the height adjustment you need.

If you have a 2-inch hitch receiver you can use Draw-Tite Ball Mount # 2753, which provides either a 2-3/4-inch rise or 4-inch drop. This ball mount uses a hitch ball with a 1-inch shank, such as Tow Ready # 19247. If you need a hitch pin and clip you can use Hidden Hitch # PC3.

If you have a 1-1/4-inch hitch receiver you can use Draw-Tite Ball Mount # 3593, which provides a 2-1/8-inch rise and 2-3/4-inch drop. This ball mount accepts a hitch ball with a 3/4-inch diameter shank, such as Curt # A-82. If you need a hitch pin and clip you can use part # F-4.

expert reply by: Adam R