Furrion Vision S LED RV Back Up Camera System Wiring Instructions
Updated 08/06/2021 | Published 08/05/2021
Question:
I have a 2018 Bighorn 3750FL and when trying to attach the side cameras I ran into this issue. There are 2 wires on the coach but 4 on the new camera/light, they are V+Camera, V+Traffic Lamp, Trigger Signal and Ground. With only a hot and ground in the coach do I attach all 3 to the hot?
asked by: Chris
Expert Reply:
You have the newer LED version of the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR which has four wires instead of the old three wire system. If you're replacing a running light you will wire the power wire on the camper to the red and brown wire on the camera, if the camera will replace a turn signal you will need to wire the power wire to the red and yellow wire on the camera and in both instances you would wire the black wire from the camera to the ground on your camper.
(click to enlarge)
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Furrion Camera Has Power but Won't Pair
- Shop: 12V PWM Filter for RV Backup Camera Systems - Hardwire
- Q&A: How to Power Furrion Side Marker Camera to Pair With Monitor
- Q&A: Wiring Guide For The Furrion RV Side Camera W/ Night Vision
- Q&A: How Do Furrion Marker Light RV Side Cameras Get Wired
- Shop: LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
- Shop: Furrion Chill HE Replacement RV Air Conditioner Unit for Furrion Setup - 13,500 Btu - Black