Should a 60 or 90 Degree Lug Nut be Used with the Kenda AM3H380?
Updated 07/21/2021 | Published 07/20/2021
Question:
Im looking at your galvanized tire and wheel combo. What lug bolt does it take 60 or 90 deg? I know its 1/2-20 but you guys offer the new lug bolts in both 60 or 90. Thanks
asked by: Paul
1
Helpful Expert Reply:
You can technically use either the 60 or 90 degree for the Kenda # AM3H380. However, I suggest going with the 60 degree option. This will allow them to still be used if you upgrade to an aluminum wheel or something.
expert reply by:
Lazer S
1
Product Page this Question was Asked From
Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 205/65-10
- 10 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Tire and Wheel Options for 20.5x8.0-10 Size Trailer Tires With 4 Lug Wheels
- Q&A: Wishbone Trailer Wiring Harness to Run 2 Sets of Trailer Lights
- Q&A: Load Range C Trailer Tire in Size 20.5x10
- Q&A: Can the 205/65-10 Loadstar K399 Bias Trailer Tire be Safely Used on the Highway?
- Q&A: Removing Surge Coupler-Actuated Brakes from Mc Clain Boat Trailer
- Q&A: Tire Pressure Rating for Tire Size of 205/65-10
- Q&A: Boat Trailer Tires and Rim Size Upgrade from 8" to 10" About 18" in Diameter
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Anti-Rattle Devices