Recommendation for Carrying a Pronto M91 Electric Wheelchair with a 2006 Scion xB

Published 07/20/2021

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(150)

$230.31

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs

(361)

$40.03

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(62)

$303.02

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2319)

$45.84

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(20)

$46.75

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2969)

$3.71

Question:

My neighbor has a Pronto M91 electric wheel chair, and she needs to car this on the back of her 2006 Scion XB , the weight of the chair is 258 #s and the dimensions are length 42inch with the foot board down 39inch with it up, width is 25.9 inch .... I am look for a hitch assembly as well as a carrier tray to accommodate this for her, do you have anything that will do this ??

asked by: JERRY B

Expert Reply:

With the 2006 Scion xB having a maximum tongue weight capacity of 200 pounds, I am going to suggest a different option to pull the Pronto M91 electric wheelchair.

You will need to start the same way with a trailer hitch, like the Curt # C11487, but you will need a few more parts to complete this set up. From here you will need a ball mount, like # C45521, a pin/clip to keep it in the hitch, # F-4, and a 2" ball, # A-82, to install in the ball mount. You will also need a wiring harness, like the Curt # C56030. This will plug directly in behind the tail lights and will require no cutting or splicing to get installed. This will get the lights working on my next suggestion as well.

Lastly, the Detail K2 Mighty Multi Utility Trailer - 6' Long - 1,295 lbs # K2MMT4X6 would attach to all the previous parts and the Pronto M91 can be easily loaded onto it. This will also fold up when not in use, making storage much less of an issue.