bing tracking image

Curt Hitch Pins and Clips - Standard Hitch Pin - F-4 Review

content loading

Customers compare F-4 to these similar products




Products Featured in this Video



Review of Curt Hitch Accessories F-4


Today we'll be reviewing part number F-4. This is the Curt Class I and Class II Pin and Clip. It's going to give us a diameter of 1/2". This is designed for 1-1/4" x 1-1/4" hitch openings. The overall length of the pin is going to give us a measurement of right at 4". The amount of usable space that we have is from the pin hole to the curve. That's going to give us a measurement of 2-1/2".

It does come with a retaining clip. That way you can secure the clip on the other side of the pin. The way this works is you just, in your Class I or Class II hitch, after you get your accessory loaded up, you need to line up your pin holes, place the pin through one side of the hitch, through the accessory pin holes and out the other side of the hitch. Once you have that through you just simply take the clip and place it on the other side of the pin to secure everything in there and to make sure that your accessory is not going to come out of your hitch. It has this nice point tip. That way it's just an easier installation as you slide it through the pin holes. That's going to do it for today's review of part number F-4.

This is the Curt Class I and Class II Pin and Clip measuring 1/2" in diameter. .


Info for this part was:

Employee Joshua S
Video by:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Brent H
Installed by:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.