How To Install the 2-1/2" Round Trailer Clearance and Side Marker Light MC58RB

Updated 07/14/2021 | Published 07/12/2021

Question:

Looking to replace our Reflectolite SAE-P-P1-68 round running lights with 2-1/2inch Round Trailer Clearance and Side Marker Light, Surface Mount - Red - MC58RB... Will this work? And I noticed that there was one wire with this product, whereas my current set up has two green wires coming in. Will this still work if I tie them all together?... Lastly, what would you do to seal the lights to the camper so water does not work its way in. Thank you for your time in advance.

asked by: Mark A

Expert Reply:

The 2-1/2" Round Trailer Clearance and Side Marker Light part # MC58RB simply installs by splicing into the running light circuit connection. Then, you'll secure the back of the light with lens removed to the outside of the trailer, over the existing hole the wires are ran though. If you have multiple wire, one is likely for ground and the other is for the running light circuit. This light grounds through the surface so you won't need to hook up the ground wire coming from the trailer (test for function). The light can be sealed with silicon around the base.

expert reply by: Conner L