Troubleshooting Trailer Tires On Tandem Axle Boat Trailer Wearing Quickly
Updated 06/17/2021 | Published 06/16/2021 >
Products Featured in This Question
Question:
Tandem axle boat trailer. 12 inch tires. Wheels 4 hole 4 inch on center. Alignment supposedly good. Not overweight. Tires wear quickly, especially rear. Will better tires help? Radials? I would like to upgrade to 13 inch, but flange is 5 inch. Clearance is no problem. Wheels are quite old. I could do tires and wheels. Suggestions?
asked by: Jim H
Expert Reply:
There are a few things that can cause trailer tires to wear quickly. Is the tire wearing normally as in all of the tread has even wear, or are they wearing unevenly?
First is if the wheels are bent from hitting a curb or pothole, next is if the tires are not run at the max air pressure stamped on the sidewall of the tire, and next is exceeding the load capacity of the tires.
Since you mentioned your tires are not overloaded I would check the wheels for any noticeable damage that could indicate they are bent. Are the tires on the trailer aired up to the max pressure stamped on the sidewall? Trailer tires have a thicker side wall and not running the max air pressure can cause quick and or uneven wear.
Going with a quality set of tires will definetly lead to a longer tire life. You did not mention specifically which tire size you have, but here are my recommendation for each size offered:
5.30-12- Taskmaster 5.30R12 Radial Trailer Tire - Load Range C # TT53012C
145R12- Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E # AM10140
4.80R12- Taskmaster 4.80R12 Radial Trailer Tire - Load Range C # TT48012C
As you can see each of the tires mentioned are radials, which are what I recommend as they will have better performance on paved road which is where the majority of trailers spend the majority of their time. If your tires are bias plys, you will need to make sure to replace all of the tires with radials as these two types of tires cannot be mixed or you will experience a very unstable ride.
If you find that your wheels are not bent then replacing them will not fix the issue. With that said if they do not have the look you are wanting or if you find they are bent then you will want to replace them. For a boat trailer like yours I really like the Aluminum Split Spoke Trailer Wheel - 12" x 4" Rim - 4 on 4 # AM22318HWT as they are aluminum so they will not corrode due to being in the water, and really have a more appealing look than the standard trailer wheel.
Even though you mentioned that the alignment is good, if this issue has happened with multiple sets of tires I recommend taking the trailer to a reputable trailer shop and have them verify the alignment.
I included videos of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- K - 65 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Looking For 4.80-12 Tires That Have A Speed Rating Higher Than 55 mph
- Q&A: Recommendation for 4.80 x 12 Trailer Tire and Wheel Combo for Highway Speeds
- Q&A: What Are Advantages Of Aluminum Wheels Over Steel Wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Find Weight Distribution Hitch For Trailer Towed With 2004 GMC Sierra
- Q&A: Max Highway Speed Rating for 4.80-12 Tires
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing





