Using Weight Distribution with 2015 Honda Pilot Touring To Eliminate Rear End Sag
Published 06/04/2021 >
Products Featured in This Question
Question:
I have a 2015 Honda Pilot Touring 4wd with the factory hitch receiver, and I just bought a Forest River No Boundaries 19.7. First trip last weekend I weighed it loaded before heading out: TW 450lbs, trailer was 4100lbs, but we went light packing so so we would likely hit the max on trailer for the vehicle 4500lbs if we carry water etc. Towed better than I expected over mountains power wise, and sway not too bad, but there is a 3inch on the rear of tow vehicle. I am looking at # EQ37060ET. I have read on the internet that you should not use a WDH on the Pilot- but also that it is fine if you turn off traction control, something that you do manually every time you start the car. Which is correct? Is this the best hitch for my setup?
asked by: Randy B
Expert Reply:
According to the owner's manual, Honda doesn't recommend using weight distribution. They say 'A weight distributing hitch is not recommended for use with your vehicle. An improperly adjusted weight distributing hitch may reduce handling, stability, and braking performance'.
The Equal-i-zer # EQ37060ET you'd mentioned would be a good choice as far as the compatibility with the camper goes, but I couldn't recommend anything that contradicts Honda's advice provided in the owner's manual.
A suspension enhancement product like the Timbren # THROD2 would replace the factory bump stops inside your coil springs and would add extra support when towing that would eliminate most of the sag you're experiencing with your camper hooked up. This is the option I'd recommend.
I've linked to a video explaining how the Timbren system works as well as to a video showing a typical installation.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Suspension Enhancement
- Q&A: Recommended Lubricant For Trailer Scissor Jacks
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Towing Components for 2026 Nissan Frontier
- Q&A: Recommended Brake Controller and Weight Distribution for 2019 Honda Pilot Towing 2026 Geo Pro 17LE
- Q&A: Availability of 2-5/16" Ball for Andersen Weight Distribution Hitch
- Q&A: Recommended Weight Distribution System for a 4,000 lbs Trailer
- Q&A: Recommended Weight Distribution Hitch for 2022 Keystone Springdale Mini 1750RD
- Article: How to Measure for Trailer Hitch Drop
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Weight Distribution Recommendation for 2024 Micro Minnie 2108
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: What Do I Need To Tow A Trailer?





