How To Replace Lock Cores On Older Yakima Q Tower  

I made a video showing how to install the new lock housing and lock for you. Hopefully you are using the new housing on a Yakima Q Tower for a roof rack. If you are trying to install it in something else, let me know what it is and I can help. The…

There isn't any type of special removal available for a stuck Yakima lock core, as it sounds like you tried the only remedy that we generally suggest, which is a lubricant. Otherwise, the only way to remove it really is by having it drilled out;…

It is possible that the production date of your pre-owned Yakima Powderhound ski carrier makes it incompatible with the current generation of Yakima's SKS lock cores. The SKS locks came into play around the year 2000, so if your Powderhound is…

When using the change key part #Y8007835 to remove and replace a lock cylinder what you have to do is first have the lock in the unlocked position. Next you will insert the change key into the core. With the key in the core you will then be able to…

The only gooseneck adapter that can replace a Lippert Turning Point pin box is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. As far as tongue weight goes, the loaded pin weight of your Grand Design 260RD needs to be…

Hey Steve, good question. The Yakima SkyLine FX Roof Rack #Y88YD will fit your 2023 Grand Cherokee 4xe with fixed mount points. You’ll still be able to use your sunroof with the rack installed, but Yakima doesn’t recommend opening it when the bars…

Hello again Carl, Yes, the Yakima SkyLine Roof Rack for Fixed Mounting Points - CoreBar Crossbars - Steel - Black - Qty 2 #Y38GB will also be a great fit for your 2021 Lexus GX 460 with flush mounted bars. I am still sticking with really liking the…

Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item #TH898 on a 2024 Bronco. To mount and use two Hullavator item #TH898 on a 2024 Ford Bronco 4…

Thank you for all of the information! While you are able to use the Hullavator #TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule…

The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 #Y00241…

You're correct, the Yakima OverHaul HD ladder racks like part #Y01151-58 only come with two locks. The towers lock into bases and these bases are what the locks attach to. The intention is that you would use one lock base on each set of towers to…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…