Installing The Brophy D-Ring Tie-Down Anchor With Backing Plate
Updated 06/10/2021 | Published 06/01/2021 >
Question:
Will you please list the bolt sizing. If you took it the wrong way youd think the 4 bolts are 9/16th on the plate. I believe they are 3/8. Then the video shows carriage bolts as to not get hung up on things and yet i just had 4 of these delivered with round holes so I bought 16 carriage bolts for nothing as I wanted the carriage bolts with the round heads. If bolts etc. are not included please update the bolts, and diameter etc. why do i have 4 round holes in each of my four plates.
asked by: Billy
Expert Reply:
I attached the demonstration video for the Brophy D-Ring Tie-Down Anchor with Backing Plate - Bolt On - 1/2" Diameter - 2,000 lbs # DR1S that you were looking at. In the video you can see that the bracket does indeed have round holes, not square. We do demonstrate the installation with carriage bolts (not included) that sink into the wood floor, however, we also mention that you should use hex bolts if using the bracket on metal floor since carriage bolts wouldn't work well for metal flooring.
You are correct in saying that the round bolt holes are 3/8". Feel free to check out the attached demonstration video for more insight on installation.
Product Page this Question was Asked From
Brophy D-Ring Tie-Down Anchor with Backing Plate - Bolt On - 1/2" Diameter - 2,000 lbs
- Trailer Tie Down Anchors
- D-Rings
- Universal
- Zinc-Plated Steel
- 2000 lbs
- Bolt-On
- Folding
- Surface Mount
- Brophy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Size of Bolts for Brophy D-Ring Tie-Down Anchor
- Q&A: Can I Back Off The D-ring part # DR1S Without Affecting It's Weight Rating
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Does Brophy D-Ring Tie-Down Anchor # DR1S Come with Backing Plate
- Q&A: How to Determine the Difference Between the New and Classic Body Styles for a 2007 Chevy Silverado
- Q&A: Can I Use The Weigh Safe Ball Mount w/ Built-In Scale WS56KR Purely As A Tongue Weight Scale?
- Q&A: Dimensions of Mounting Brackets of Buyers Products Forged D-Ring
- Q&A: Dimensions of Caliber D-Ring Anchor Kit part # CA89VT
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Install E-Track in 3 Easy Steps


