42" Trailer Hitch Receiver Extension For 2020 Ram 3500

Question

Question:

will the Cannon 42inch Extension E1642 work and fit a 2020 Ram 3500 it says ford

asked by: Todd M

0

Expert Reply:

The TorkLift Cannon Hitch Extension # TLE1642 is designed to work with trucks that have a 3" factory cross bar style trailer hitch receiver. To my knowledge I have only ever seen those on the 2017 and newer Ford F-350's.

I believe that your 2020 Ram 3500 has a 2-1/2" receiver from the factory. If that is the case you will need to replace your hitch with the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1111-30. Then you will be able to use the TorkLift SuperTruss Hitch Extension # TLE1542 with your Ram 3500.

expert reply by: Bud M

0

Answer 1

If the battery you disconnected from your trailer is also the battery that powers the breakaway system then having the pin pulled on the switch won't be an issue. If you left the breakaway battery installed on the trailer then the pin being…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Heath, thanks for reaching out! The Curt A20 #C55DR and the B&W Companion #BWRVK3670 you're looking at are both excellent 5th wheel hitches, but I have to go with the Companion in this case simple because it is more robust and has a…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Hey Dan, The base rail brackets don't change between the different bed lengths so the base rails included with the Demco Recon 5th Wheel Trailer Hitch for Ram #DM74TV would be a compatible fit. If you don't already have an in-bed 7-way then…

view full answer...

Answer 12

The Head Unit and R16 Roller Adapter #C16515 is more of an entry level fifth wheel head designed for a lower price point, whereas the A16 part #C16520 is a bit nicer with it's 2 piece jaw system that will provide better king pin contact which…

view full answer...

42" Trailer Hitch Receiver Extension For 2020 Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching