Curt Weight Distribution System that Uses L-Bracket Chain Hangers Instead of Chains
Updated 05/13/2021 | Published 05/12/2021
Products Featured in This Question
Question:
I have a set up with rating of 10,000 lbs and the chain tensions. I would like to know if I can convert everything over to the frame mount and not use the chains?
asked by: William T
1
Helpful Expert Reply:
If you have a weight distribution system set up with chain hangers and you are wanting to go go frame brackets instead it would require an all new setup as the types of spring bar hangers are not interchangeable.
So for a 10,000 lb version of the Curt TruTrack you'd want the part # C17500.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Frame Brackets for Curt TruTrack Weight Distribution System w/ Sway Control - 10" Frames
- Accessories and Parts
- Weight Distribution Hitch
- Frame Bracket
- Brackets
- TruTrack
- CURT
more information >
Continue Researching
- Q&A: Recommended Weight Distribution System w/ Sway Control for a Trailer w/a 1,050 lbs Tongue Weight
- Q&A: Trailer Hub/Drum that Fits Lippert 4,000 lb Axle
- Q&A: Replacement 126003 Hub for a Lippert 3,500 lbs Axle
- Q&A: Replacement Hub and Drum Kit for a Lippert 3,500 lb Axle
- Q&A: Bearing Kit that Fits Lippert 4,000 lb Trailer Axle of Gulf Stream CSK19
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Hub for a Lippert LCI 126003 Hub
- Q&A: Weight Distribution System For 7-1/2 Tall I-Beam Trailer Frames
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class