Determining Replacement Bearing for Trailer with Destroyed Bearing
Question:
Nothing left of bearings but a piece is stuck on the spindle
asked by: Lenny
0
Expert Reply:
Can you get me the diameter of the spindle where that bearing rides? With that I can see which replacement bearing you'd need. For example the part # L44649 that you referenced would fit a spindle diameter of 1.063 inch.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Measure a Trailer Axle
- Q&A: Are Bearings L44549 and L44649 Interchangeable
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles