Replacement Manual Lift Operator for MaxxAir MaxxFan 5100k

Question

Question:

I am looking for a manual lift mechanism for my maxx air fan 5100k. The one that come up from the website is for powered Maxx air fan. Can you help me out. Thank you Jess

asked by: Jess S

0

Expert Reply:

To replace the manual lift operator on your MaxxAir 5100k # MA00-05100K you'll want to use the Replacement MaxxAir Roof Vent Manual Lift Operator # MA10-20281K-3CF.

expert reply by: Erik B

0

Answer 1

Yes, the 185/80-13 tire size of the #AM10210 that you referenced fits the same wheels size as the 175/80-13 that you referenced so it will fit and work great. These are radials like you want, have a higher speed rating at 81 mph, and also have the…

view full answer...

Answer 2

We do have some replacement parts available for the MaxxFan Roof Vent w/ 12V Fan, #MA00A04301K. If your vent lid will not stay closed while driving, you may need the Replacement Operator Mechanism, #MA10-20281K-1AF for a powered lift vent and…

view full answer...

Answer 3

You need the Replacement MaxxAir Roof Vent Manual Lift Operator, #MA10-20281K-3CF. This replaces the manual lift operator for your MA00A04301K and the MA00A04401K, MA00-05100K, MA00-06401K, MA00-04000K, or MA00-05301K models.

view full answer...

Answer 4

Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF is what you want for your MaxxAir Deluxe Fan if it is a power lift or the Replacement MaxxAir Roof Vent Manual Lift Operator #MA10-20281K-3CF if it…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...