Securing Axle U-Bolts With Loctite
Updated 04/27/2021 | Published 04/24/2021 >
Products Featured in This Question
Question:
I purchased an axle and you bolts from you guys but have a question regarding if I need to put locktite on the nuts in addition to torqueing them to specs?
asked by: Hernie E
0
Expert Reply:
Though it is not completely necessary to use something like Loctite's Threadlocker # LT37420, there wouldn't be any adverse affects either. Most U-Bolt kits do come with lock nuts making them more secure than standard nuts, but you can definitely apply # LT37420 to completely secure their purchase on the U-Bolts.
expert reply by:
Lazer S
0
Product Page this Question was Asked From
Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish
- Trailer Suspension Parts
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Square Axle - 1-1/2 Inch
- 1/2 Inch Diameter
- 5 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Why Self Adjusting Brakes or Manual Adjust Trailer Brakes
- Q&A: Can I Replace 4 Leaf Springs With 5 Leaf Springs For The Axle On My Trailer
- Search Results: cre3000
- Search Results: leaf springs
- Search Results: 5200 lbs trailer leaf springs
- Search Results: 2 leaf trailer leaf springs
- Search Results: trailer leaf springs
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Video: Breaking Down the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Q&A: Recommended 5200lb Dexter Axle To Replace 5200lb Lippert Axle W/ 86-1/2" Hub Face Measurement
- Video: The Low-Down on the LaSalle Bristol RV Sewer Slip Hub with Flange
- Video: A Closer Look at the LaSalle Bristol Cable-Actuated RV Waste Valve
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: anti~sway bar
- Video: Let’s Check Out the Extended U-Bolt Kit for Roadmaster Anti-Sway Bar
- Search Results: hd42656bx
- Shop: Roadmaster Rear Anti-Sway Bar - 1-3/4" Diameter
- Shop: Extended U-Bolt Kit for Roadmaster Anti-Sway Bar
- Video: Feature Breakdown: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles
- Q&A: Can The Valterra Waste Valve Body w/ Flexible Cable # VAL54MB Be Trimmed To Custom Length?
- Q&A: Does Trailer Axle with Idler Hubs e65GR Come With U-Bolts
- Q&A: Installation of Idler Hub on etrailer e65GR Trailer Axle
- Q&A: What Size Pipe Does Valterra Waste Valve Body # VAL54MB Fit
- Shop: Vehicle Tow Bar Wiring
- Shop: Suspension Enhancement


