Wiring the Replacement Motor Klauber A-300 Model

Updated 11/01/2024 | Published 04/14/2021

Question:

My Slide motor quit working, gears are grinding, I need a replacement motor. I was sent one with 4 wires, one 14 ga elk and red wire and two small black wires. My original motor only has 2 wires. Not sure what to do!

asked by: Terry A

Expert Reply:

I called Lippert about your question on the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model, # LC157511. Their Tech Rep stated that the two smaller wires are to power the brake release/engage on the slide and should be connected to the red wire, then remove and replace the motor and wiring with current.

expert reply by: Michael R