Can Monitor From Furrion Vision S Camera System Be Swapped Between Travel Trailer and Truck

Updated 04/02/2021 | Published 03/31/2021

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen

(718)

$481.30

Multi Device RV Charging Station - 12V Socket - 2 USB Ports - Hardwire - Black

(60)

$46.01

12 Volt Outlet with Waterproof Cap - 10 Amp - Black

(16)

$19.79

Question:

how do I wire cameras for observation viewing while inside RV and can I move monitor back and forth from truck to camper, would you have a link or download for this arrangement ?

asked by: Vincent M

Helpful Expert Reply:

Since the Furrion Vision S camera system like the one you referenced, part # FOS05TASF communicates wirelessly with the 5-inch monitor, you'll just need a 12-volt power source in the camper to plug the monitor into. If you don't already have a 12-volt power outlet, an outlet like # 37215095 would work very well for such purpose. If you don't need the USB ports provided by the # 37215095, you could use # DG6112VP.

Once this is set up, you'll be able to move the monitor from the truck to the travel trailer, but you might need to pair the camera to the monitor again depending on how long it's been unplugged. This is easily done by toggling through the menu on the monitor and pressing the pair button on each camera as outlined in the linked instructions.

I've linked you to a product demonstration video for the # FR97FR Furrion Vision S camera system.

expert reply by: Mike L