Will the E-Z Flex Equalizers # K71-652-00 Fit on a 2006 Laredo 29RK With 5000 lb Tandem Axles
Question:
I have a 2006 laredo 29rk fifthwheel. The owners book shows 2 alko axles @ 5000# each. Springs are 1.75inch wide.Am I thinking right ,the 652 should work? Was hoping the 6000# cap. was not per side Thanks
asked by: SteveWhitaker
Helpful Expert Reply:
The E-Z Flex Suspension Kit, # K71-652-00, will work on trailers that have axles rated up to 6,000 lbs each. Your 5,000 lb axles fall within the capacity of these equalizers so the weight would not be an issue. These equalizers are also compatible with your 1-3/4 inch leaf springs, but you will want to make sure they are a compatible replacement for your current equalizers.
The E-Z Flex equalizers were designed to replace the standard Dexter equalizers # 13-104. This number should be stamped on your equalizers. If you cannot find a stamped number or you have a different brand equalizer, then you will want to take a few measurements to verify that the E-Z Flex equalizers will fit.
The axle spacing on your trailer must be 33 inches center axle to center axle. The distance between the lower bolt holes on center flexes between 5-1/4 inches and 6-1/4 inches. The bolt hole diameters are 9/16 of an inch.
I have attached a photo showing the measurements of the E-Z Flex equalizers for you to compare to your current equalizers.
Product Page this Question was Asked From
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Continue Researching
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: Suspension Enhancement
- Search Results: cre3000
- Shop: Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Vehicle Sway Bars
- Q&A: Troubleshooting Installation of Dexter E-Z Flex Suspension Kit With Shackles Hanging Down
- Shop: Hellwig Front Anti-Sway Bar - 1-1/2" Diameter
- Shop: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Front Axle
- Shop: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Front Axle
- Search Results: weigh safe
- Search Results: l44649
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Q&A: How Tall Are The Timbren Trailer Suspension Enhancement Springs For Underslung Axles?
- Q&A: Can The MORryde Suspension Upgrade Kit MR46ZR Be Used With Lippert Road Armor Equalizers
- Video: Complete Breakdown of the Timbren Trailer Suspension Enhancement System for Underslung Axles
- Video: Comprehensive Review: Dexter E-Z Flex Suspension Kit
- Search Results: trailer equalizer
- Q&A: Can Dexter E-Z Flex Work With Roadmaster Comfort Ride Shocks On a 2022 Grand Design Imagine 22MLE?
- Q&A: Will Dexter E-Z Flex Heavy Duty Rubber Suspension System Fit a 35 Inch Axle Spacing
- Q&A: Replacing/Upgrading An Equalizer 6-1/4" Long And 4" Tall
- Search Results: 30a plug
- Video: Mount: Dexter E-Z Flex Suspension Kit on a 2021 Grand Design Imagine Travel Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: gas strut
- Video: Dexter E-Z Flex Suspension Kit Spec Review
- Search Results: dexter ez flex kit
- Video: Checking Out the Replacement Equalizer Plate for Lippert Tandem Axle Lift Kit
- Video: Checking Out the Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle