Recommended Trailer Hitch for 40" Wide Frame

Question

Question:

Hi, Ive a question about your model #98869: namely, is there a version with a total width of 40? I believe that would fit my older truck very well. Thanks,

asked by: Jerome B

1

Helpful Expert Reply:

The best option we have would be a universal adjustable width trailer hitch, the Adjustable Width Trailer Hitch Receiver part # C13704. These are designed for applications in which custom trailer hitch fit options are not available. The width can be adjusted to fit any frame between 22" and 66" wide.

expert reply by: Conner L

1

Answer 1

Hey John. The 2016 E-450 is a completely different chassis than the F-450 so the Curt Hitch item #C15845 will not fit. I'll get that question fixed because it is confusing. To add rear hitch to your 2016 E-450 cab and chassis you'll need to…

view full answer...

Answer 2

We have the Curt hitch part #C15845 which fits your 2016 Ford F-450 Cab and Chassis and is a 2-1/2 inch trailer hitch. This has a capacity of 20,000 lbs too.

view full answer...

Answer 3

I just went out to the warehouse and measured the Curt Trailer Hitch Receiver item #C15845. I have attached a couple of diagrams with the dimensions of this hitch on them. From the center of the back bolt to the front of the receiver is 26" The…

view full answer...

Answer 4

We do have a trailer hitch for you, though the Ford E-350 didn't have a Super Duty version available until 1999, so what you have is an Econoline model (and just as a note, we don't have a way of searching anything by VIN so this was based on…

view full answer...

Answer 5

Hello Tim, Are you asking if you can back up with just the head installed on the Weigh Safe True Tow Weight Distribution Hitch #WS79VR, when you put the trailer coupler onto the ball? If so, then yes because at that point it is really just a ball…

view full answer...

Answer 6

Before getting into my answer I first have to ask if you intend to tow with your 2017 Toyota RAV4? If not you can skip to the second paragraph. The reason I ask is because RAV4 will be an issue. The available trailer hitches are not rated high…

view full answer...

Answer 7

The Draw-Tite Max-E-Loader Trailer Hitch Receiver #41547 is symmetrical so while I don't have the center location of the receiver right off-hand, what I can say is that you will be able to measure the distance between the mounting points (or even…

view full answer...

Answer 8

Please refer to the included images I made showing measurements for Curt trailer hitch #C14048. This hitch is designed to fit 1999 to 2016 Ford cab and chassis model trucks. Those are the trucks sold without a bed and are then turned into service…

view full answer...

Answer 9

Hey Jim, I drew up a little diagram of the Blue Ox Trailer Hitch Receiver #BLU75UR's dimensions so you can see if this would be a fit. It's not listed as a fit for your E-series cutaway chassis but the F and E-series can some times be…

view full answer...

Answer 10

The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2 inch Receiver #15903 will work on your 2001 Ford E450. The trailer hitch has a black powder coated finish that helps resist rust and corrosion. It has a strong, secure weld-on attachment. The…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Trailer Hitch for 40" Wide Frame

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching