Troubleshooting Furrion Vision S Camera System Not Getting Camera Signal On Monitor

Updated 03/16/2021 | Published 03/11/2021

Question:

Installed the Furrion Vision S camera system. The monitor boots up but all I get is No Signal the camera is installed at the top rear of 2017 31 foot Coachmen Legacy addition, Catalina. Straight line distance camera to monitor is 43 feet. the camera is mounted below the rear roof line and has no clear sight to the monitor in the truck. Ford F250 short bed. I have moved the monitor to the rear of the trailer about 12 from camera no change. camera is powered from top center running light. that has power. I do not have a meter to test if the camera is sending out an rf signal. thanks in advance for any suggestions.

asked by: Backup C

Expert Reply:

I am sorry to hear that you are having issues getting your Furrion Vision S camera to display on the monitor.

Since you mentioned that you already tried moving the monitor closer but that didn't help, I recommend double checking that there is no appliances on in your trailer that could be causing interference.

If that is not the case then I recommend checking that the antenna on the is installed all the way, and is pointing vertically.

Lastly try to unpair the camera and repair it to the monitor.

If none of these troubleshooting steps fix the issue just let me know and we will go over some more in-depth steps.

expert reply by: Samuel C