Can Spindle of Trailer Axle Be Measured to Pick Out Replacement Bearings
Updated 03/10/2021 | Published 03/07/2021
Question:
I have a 2000 Jayco Kiwi 17A. I took the bearings off to replace them and they have no numbers on them. I may also replace the hub. Any suggestion on how to find the right parts?
asked by: Robert
0
Expert Reply:
Use a digital caliper like # PTW80157 to measure the diameter of the spindle where your bearings ride like you see in the attached picture. With that and the bolt pattern of your hubs we'd be able to get you set up with a new hub or just bearings.
expert reply by:
Jameson C
0
Where to measure
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Q&A: How to Determine the Replacement Hubs for a 2002 Magic Tilt Trailer
- Q&A: Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Q&A: Diameter of Spindle Washer # SW1000 and Wobble Roller Retainer Ring CE10981
- Q&A: How to Choose the Correct Size Trailer Winch For a Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Will Installing Trailer Hitch on 2020 Nissan Murano Keep Hands Free Liftgate From Working
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting Trailer Bearings that Fit Almost Too Tight to Install
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements