Parts Needed to Install Brake Controller in 2021 Hyundai Palisade

Question

Question:

need brake control and 7 point plug for 2021 hyundai palisade installed

asked by: Gary L

0

Expert Reply:

For your 2021 Hyundai Palisade to install a brake controller like the Redarc Tow Pro Liberty part # RED44FR you'll need to install a 7-way but first you'll need to start with a 4-way like the # 118784 and then convert to a 7-way with the # ETBC7.

expert reply by: Jameson C

0

Answer 1

Your 2021 Hyundai Palisade has brake controller wiring that runs from the port under the dash back to the plug that the Curt 7-way kit part #C68JR plugs into. That is why this kit that fits your vehicle does not have any wiring that runs from the…

view full answer...

Answer 2

We have an easy way to install a 7-way on your 2021 Hyundai Palisade but the factory trailer wiring port you have at the rear of your vehicle only has 4-way connectors that fit it directly. So you'd need to first install a 4-way to that connector…

view full answer...

Answer 3

I have a solution for you, but the port you're referring to does not allow the direct installation of a 7 way trailer plug on your 2021 Hyundai Palisade. If you don't have a 4 way plug already there, you'll need to start by installing…

view full answer...

Answer 4

There are a couple key differences between the Curt Echo Mobile part #C51180 and the Echo Under Dash #C27JR with the install harness part #C77BR. If you wanted the absolute easiest install that literally takes seconds go with the Echo Mobile as it…

view full answer...

Answer 5

Not another one! Just kidding Dirk! I was in the Marines I enjoy these conversion questions on the M1101 trailers. I'd be more than happy to list the parts you need, along with quantity, and confirm compatibility. 1 - Timbren Axle-Less Trailer…

view full answer...

Answer 6

Hey Shauna, We kit the Redarc Tow-Pro Elite Brake Controller #RED75KR with the custom harness, so it is the same as The Redarc Tow-Pro Trail Brake Controller #RED94UR other than their physical appearance. I recommend going with whichever is cheaper…

view full answer...

Answer 7

Hey Sharon, the better option for you would be the Fastway e2 part #FA92-00-0600 which is going to better match your loaded tongue weight compared to the system you mentioned. This has a tongue range of up to 600 lb instead. This would allow you to…

view full answer...

Answer 8

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 9

Hey Scott, thanks for reaching out. At this time, we offer only one size for the Lippert Schwintek Slide-Out System part #LC34VC, and I'm sorry to say we don't have a dimensional diagram for that one. What I can tell you is the 62-5/8"…

view full answer...

Answer 10

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 11

Hey Brian, so the company that makes the P2 is currently out of business (we hope they come back) so while that's not an option we do have the Redarc Tow Pro Liberty part #RED52VR which I think you'd really be happy with although it does not…

view full answer...

Parts Needed to Install Brake Controller in 2021 Hyundai Palisade

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching