Availability 1-1/2” Square Post-Style Guide-Ons Mounting Brackets.

Question

Question:

1-1/2” square post brackets. What’s the item number?

asked by: Stephen P

0

Expert Reply:

It sounds like you are looking for the Replacement Hardware Kit for CE Smith Post-Style Guide-Ons # CE11452-A which are the brackets used in the CE Smith Post-Style Guide-Ons for Pontoon Boat Trailers # CE27670 you were looking at.

I included videos for each of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The pontoon trailer guide-ons only come in a set of 2 as that is all that is needed, although you can add more if you believe that it is necessary. That all just depends on how confident you are about staying on the right track once you have started…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 4

Pontoon boats normally use guide-ons that mount in the center of the trailer, and even with the three pontoons on your aptly named Aqua Patio Tritoon having lifting strakes, the CE Smith Post-Style Guide-Ons for Pontoon Boat Trailers #CE27670 should…

view full answer...

Answer 5

Typically you want to put pontoon guide ons like the #CE27670 between 2 and 4 inches away from the pontoons. These would definitely not dent the pontoons.

view full answer...

Answer 6

Hello Kyle, Yes, our etrailer Electric Trailer Jack - A-Frame - 18" Lift - 3,500 lbs #e23ZV would be an excellent fit for your 2-horse trailer at 3,000 pounds. A 4-flat trailer connector only carries lighting functions (tail, turn, brake, and…

view full answer...

Answer 7

Hey Chris! The black wire on the etrailer Electric Trailer Jack #e23ZV is just a ground wire. Realistically you can ground it however you want but I would say running it to the frame with a self-tapping screw as indicated in the instructions is the…

view full answer...

Answer 8

It is not required to install a washer between the outer bearing and the castle nut on the Trailer Idler Axle Beam with Easy Grease Spindles part #e48GR. That said, it's not a bad idea to use one and I recommend this to ensure there is no damage…

view full answer...

Answer 9

Yes, the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 can work on the inside of a pontoon boat. Based on the photo you may prefer the CE Smith 90-Degree Bunk Board Guide-On Kit #CE27600K90 which will includes…

view full answer...

Answer 10

Hey Chris, congrats on the new trailer! I've got two trailer dolly options that are going to work great with your 8,800 lbs 2026 Airstream Classic 28. One is a manual and the other is electric. Manual - Trailer Valet XL Trailer Dolly with Chain…

view full answer...

Answer 11

Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…

view full answer...

Answer 12

Yes, there is Jamie! The Third Wheel Adapter for Parkit360 Force Electric Trailer Dollies item #PA93VR is exactly what you need to make it easier to maneuver your dolly around. It works with the Parkit360 Force 10,000 lbs item #PA46VR or 5,000 lbs…

view full answer...

Availability 1-1/2” Square Post-Style Guide-Ons Mounting Brackets.

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching