Recommended 2000lb Trailer Axle That Measures 53" Spring Center To Spring Center
Updated 02/04/2021 | Published 01/31/2021
Products Featured in This Question
Question:
I use Dexter brake parts on my existing pop up camper. Do you have a 2000 lb easy lube axle with a 53 from spring center to spring center measurement?
asked by: Roger G
Expert Reply:
I may have an option that works for your trailer, but we do not currently offer a 2000lb axle that measures 53" from spring center to spring center.
You can have the current spring seats removed and new ones welded in the correct space for your pop up camper, but you will need to know the hub face to hub face measurement of your current axle as that is something that cannot be changed.
The Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs # 20545I-EZ-72-15 has the EZ-lube spindles and 2000lb axle rating you are looking for, but measures 72" hub face to hub face and 58" spring center to spring center.
If your current axle has the same hub face to hub face measurement this axle would be a great choice and you could weld on the Spring Seat # TRSS175 to give you the 53" spring center to spring center you need. You would also need to have an axle shop weld on the Brake Mount Flange # 4-34 to allow you to mount trailer brakes.
If your current axle has a different hub face to hub face measurement, you may be interested in the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 2,000 lbs # ASR2KHDS01 which bolts to the frame of your trailer to replace a standard axle and will also replace your leaf spring suspension due to the built in AEON progressive main spring and rebound spring.
This option already has the brake mounting flange, but uses 3500lb Electric Trailer Brake Assemblies # AKEBRK-35-SA and Hub and Drum Assembly # AKHD-545-35-EZ-K.
I included videos for each of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Search Results: brake plate
- Search Results: brake mounting flange
- Search Results: mounting flange
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Q&A: Replacement 7 inch Brake Assembly for Fiat Elnagh 320 Motorhome
- Q&A: How to Determine if 2,000 lb Electric Trailer Brakes Will Fit
- Q&A: What Do I Need To Add Electric Brakes To My Carry All Trailer?
- Q&A: A Professional Should Install Trailer Brake Mounting Flange # 4-34
- Q&A: Can a Hayes 10 x 1 5/8" Braking Assembly W/ No Mounting Flange Be Converted to a Standard Flange
- Q&A: Adding Brake Flanges To An Aluminum Trailer with 2,200 lb Axles
- Shop: Brake Mounting Flange for 2-3/8" Round Axle
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 2-3/4" Pilot Hole
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Q&A: How to Measure for a Replacement Axle, Hubs, and Leaf Springs for a Boat Trailer
- Article: How to Measure a Boat Trailer Axle
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle