Trailer Hitch Fit for 2021 GMC Acadia AT4

Question

Question:

Looking at part #76023, I am seeing mixed information on weather it does or does not fit the AT4. It says AT4 and then just after it says excluding AT4. It is very misleading. I am guessing it fits both but would like to know before I purchase. Thank You!

asked by: TB

0

Expert Reply:

According to Draw-Tite, the # 76023 Class III hitch is indeed a fit for the 2021 GMC Acadia AT4.

If you'll be using the hitch for towing purposes, you'll also need a few other items to complete your towing system. For a trailer connector, use part # 118720 along with the # C45010 ball mount with pin and clip # PC3 and either the # 19260 1-7/8 inch trailer ball or # 63845 for a 2 inch ball.

I've linked to installation videos for the hitch and the trailer wiring harness.

expert reply by: Mike L

0

Answer 1

There is a hitch for your 2023 GMC Acadia AT4 that mounts behind your rear bumper. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item #76023.This hitch is custom fit and bolts to your GMC with included hardware. I really like the Draw-Tite…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Trailer Hitch Fit for 2021 GMC Acadia AT4

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching