Dimensions of Base Plate Pad of Yakima Overhaul HD Ladder Rack

Question

Question:

What are the dimensions of the Yakima Overhaul base plate ? Part # 8881013 Thanks

asked by: David L

1

Helpful Expert Reply:

The underside base plate pad of the Yakima Overhaul # Y01151-5855 is 20 inches long, by 6 inches wide, and 3/4 inch thick.

expert reply by: Jameson C

1

Shane

8/28/2025

When you say the base plate is 3/4”. Is it 3/4” thick before the 90 degree mount? What I want to know is what is the measurement from the bottom of the base plate to the bottom of the 90 degree mounting bracket? I’m mounting on a tonneau cover with a track and need to fill that space perfectly for stability. Let me know

Jameson C.

8/28/2025

@Shane That dimension is right at 1 inch.

Answer 1

If the instructions for the Yakima 60" Tracks for Roof Racks #Y01135 state to use the mounting bolts on every other hole then the 12 mounting bolts included in part #Y8810155 is enough for 2 tracks. Although you can cut them to size, if you use…

view full answer...

Answer 2

Hey Scott, you'd need to use a dual hitch adapter like the Curt part #D210 which has a ball mount platform on the bottom of it and a hitch opening above that would allow you to use a winch in. The #RM-077-2 that you referenced isn't rated to…

view full answer...

Answer 3

Hey Kieran, thanks for reaching out! Yes, you can trim the Yakima 54" HD Tracks #Y64MR down to your 48" length you need and the end caps will still fit. That's one of the benefits of using one of these track systems! What do you plan on…

view full answer...

Answer 4

Yes, you can Adrian! The BAKFlip MX4 Hard Tonneau Cover item #BAK52RV will work with the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters item #Y01151-5755. You'll just need to install the TS Rails for TruXedo Elevate…

view full answer...

Answer 5

Hey Todd! Yes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5755 is compatible with the Synetic MR Retractable PRO Tonneau Cover on your 2025 Toyota Tacoma. The adapters will fit the T-slot rails on that…

view full answer...

Answer 6

Hey Shelly! The Velit Portable Diesel Heater #VE76QV does not have a built-in fuel tank. It uses an external diesel supply instead and includes a 6' fuel line that connects to the heater. For the fuel source, you can use the Velit 1 Gallon…

view full answer...

Answer 7

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 8

Yes it does! The Pace Edwards UltraGroove Retractable Hard Tonneau Cover item #PE68CV is compatible with the adapter included with the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack item #Y01151-5955. Both of these parts are confirmed to fit the…

view full answer...

Answer 9

You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Dimensions of Base Plate Pad of Yakima Overhaul HD Ladder Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching