How Does Cap Nut Get Removed From Shaft
Updated 11/12/2020 | Published 11/11/2020
Question:
Hi, How do I open the old replacement Cap Nut - Zinc - 1/2 Item # CE10800? Thank you
asked by: Jerry P
0
Expert Reply:
Removing cap nuts like the part # CE10800 requires grabbing the outer flange with a set of pliers to pry open the cap enough how to pull the cap off.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Cap Nut - Zinc - 1/2" - Qty. 1
- Accessories and Parts
- Boat Trailer Parts
- Hardware
- 1/2 Inch Diameter
- Nuts
- Cap Nut
- CE Smith
more information >
Continue Researching
- Video: Checking Out the 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles
- Search Results: keel rollers
- Video: U-Bolt Plate for 2" Square Axle: The Breakdown
- Video: What to Know About the Zinc Shackle Bolt with Locknut for Double-Eye Springs
- Shop: Phoenix USA QuickTrim Hub Cover for Trailer Wheels - 5 on 4-1/2 - ABS Plastic - Chrome - Qty 1
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Q&A: Boat Trailer Slipper Spring Installation
- Shop: 2" Square Trailer U-Bolt (Qty 2)
- Shop: Replacement Nut for Trailer Suspension U-Bolts - 1/2" Diameter - Galvanized
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Q&A: How Do Pal Nuts Remove from Roller Shafts
- Video: The Low-Down on the CE Smith Side Guide Roller for Boat Trailers
- Q&A: Could Keel Rollers Be Used at the Bottom of Trailer to Roll Boat On
- Q&A: Recommended Guide to Center 1850 Lund Impact on Shorelander Boat Trailer
- Q&A: How to Determine What Size Wobble Rollers are Needed to Replace Boat Trailer Rollers
- Q&A: Should Boat Trailer Roller Shafts be Greased
- Q&A: Pal Nut Removal Instructions
- Article: Boat Trailer Guides: Which are the Best?