Sealant Needed When Installing Curt Hitch in 2002 Honda Civic Si

Updated 11/05/2020 | Published 11/03/2020

Products Featured in This Question

Curt Tail Light Converter with 4-Way Flat Trailer Connector

(367)

$27.94

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2634)

$16.89

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

(2336)

$30.28

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(60)

$433.26

Loctite RTV 598 High-Performance Silicone Gasket Maker - Black - 2.7-Fl Oz Tube

(190)

$8.71

Question:

Wondering what sealant to use for the new holes drilled into the trunk pan on a 2002 Honda Civic Si. I have automotive seam sealant, which may be suitable, although it takes a while to outgas. But its meant for this sort of application, I think.

asked by: Callen V

Expert Reply:

That's a good question, because you do need to make sure you have a nice seal with the holes in the trunk of your 2002 Honda Civic Si when you are installing the Curt Trailer Hitch Receiver # C11204.

What I recommend is the Loctite RTV 598 High-Performance Silicone Gasket Maker # LT37467.

The Loctite sealant is designed specifically to perform the needed function, which is keep out fumes and moisture, and is definitely the route I would go when installing this hitch.

Finally, I did want to mention if you do plan on doing some light towing with your '02 Civic, you will need a couple more parts: Curt Circuit Protected Converter w/ SMT # C56175, Drawbar # 3593, and - 1-7/8" Hitch Ball # 19256 or 2" Hitch Ball # 19258.