Mounting Bolt Pattern of Optronics Trailer Light Kit TLL56RK
Updated 11/04/2020 | Published 11/03/2020
Question:
I need a submersible trailer light kit to bolt on to my galvanized trailer. Current lights are 8inch wide, 3inch tall, 2.5/8inch deep. The 2inch bolt pattern when looking at the light face on the passenger light: 23/4inch from left, bolt, 2inch on center, bolt, and 31/4to the right edge. I have some room for adjustment on the left edgeinside of light but none on the right edge. Any more than 3.25 on the right, and the light would extend beyond the bracket. Item #TLL56RK has the bolt pattern in the description but the dimensions of the bolt pattern are not listed. What is the minimum distance from the top of the light to the bolt. Do you have any sugestions?
asked by: LeRoy H
Helpful Expert Reply:
The distance between the mounting holes of the Optronics trailer light kit part # TLL56RK is 2 inches like you mentioned needing. The distance from the mounting holes to the top of the light is 1.825 inches.
Product Page this Question was Asked From
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- License Plate
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 6L x 3-1/2W Inch
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Where to Connect Curt Wiring 12V Hot Lead In 2026 Kia Sportage Hybrid
- Q&A: What is the Difference Between Over 80 inch and Under 80 inch Trailer Tail Lights
- Article: Trailer Tire Sizing
- Q&A: Working Running Lights, But No Turn Signals or Brake Lights On Trailer
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Do Thinline LED Clearance and Side Marker Lights Come With Bracket and Wiring
- Q&A: Recommended Replacement Tail Light Assembly for 6 inch x 3 inch Tail Lights
- Q&A: What Leaf Spring and U-Bolt Kit do I Need for My 2019 Keystone Cougar 26RBS?
- Article: My Trailer Hitch Doesn't Fit
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle