Over-Under Axle Conversion Kit for 7,000 lb Mobile Home Axle
Updated 10/09/2020 | Published 10/07/2020
Products Featured in This Question
Question:
Is there an over under conversion available for 7k lb mobile home axle?
asked by: Andy T
Expert Reply:
The Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00 is compatible with most 7k trailer axles. It is designed for 3 inch diameter axles which are standard 7k trailer axle specs but mobile home axles can be different. If your motorhome axle is this diameter, you will be all set. If your axle has a larger diameter, then you will need to weld new spring seats to the top of the axle. For instance you would use # TRSS350 for a 3-1/2 inch diameter axle which is the next standard size.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Bolt On 7,000 lbs Capacity Square Jack
- Q&A: Trailer Hub Recommendation for Pace American 6 x 12 Trailer with Dexter Axle
- Q&A: What Upgraded Equalizer Can I Use to Replace My 5 5/8" Long Standard Equalizer?
- Article: Trailer Wiring Diagrams
- Q&A: What Axle Can I Use to Replace Dexter Axle DEX 5886681?
- Article: Trailer Lighting Requirements
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: Recommended Stabilizer Jack for a Aluminum Trailer w/ Low Ground Clearance
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Article: How to Measure a Trailer Axle
- Article: Towing a Trailer? Let's Talk About Brake Controllers