Which Grease Seal is Used with Dexter Trailer Hub Assembly # 8-201-9UC3-EZ
Updated 04/09/2013 | Published 10/23/2012
Products Featured in This Question
Question:
I need a 010-036 grease seal for my axle, I cannot tell from the parts list if this is the right seal that is supplied with this hub assembly.
asked by: John V
Expert Reply:
The seal that comes with hub # 8-201-9UC3-EZ is a 10-10 seal. For a pair use # RG06-090. These seals have an inner diameter of 2.125 inches and an outer diameter of 3.376. They are used with E-Z Lube and Oil 5,200, 6,000 and 7,000 LB Axles. I have included a link to a video review of the seal for you.
I could not find a seal with the numbers you provided but if you have hub # 8-201-9UC3-EZ then the correct seals are # RG06-090.
There is a 10-36 seal, # RG06-070. This seal has an inner diameter of 2.250 inches and an outer diameter of 3.376 inches and is used on E-Z lube end axles. The difference is that the inner diameter of this seal is 2.250 inches and the 10-10 is 2.125 inches.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is The Difference Between Dexter Hub/Drum 8-201-5UC3-EZ And 8-201-9UC3-EZ
- Search Results: car tie down straps
- Search Results: trailer jack
- Search Results: weld on d rings
- Search Results: trailer hubs and drums
- Shop: Dexter Trailer Wheel Lug Nut - 9/16" - 90-Degree Coned - Right-Hand - Qty 1
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Drive-in Wheel Bolt for Trailer Wheel Hubs - 9/16" Diameter x 2-5/16" Long - Qty 1
- Shop: etrailer Forged Steel D-Ring Tie-Down Anchor with Weld-On Clip - 1/2" - 4,000 lb WLL
- Search Results: heavy duty forged ball mount trailer hitch ball mount
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Q&A: Is Weight Capacity Listed on CargoSmart Forged Steel D-Ring Tie-Down
- Q&A: Total Height of Round, Pipe Mount Swivel Jack # TJP-5001S-B
- Q&A: Does the Footplate on etrailer 3K Trailer Jack TJP-5001S-B Spin when Handle is Cranked
- Q&A: Dimensions and Pin Size For Round, Pipe Mount Swivel Jack # TJP-5001S-B
- Q&A: Dimensions For Round, Pipe Mount Swivel Jack # TJP-5001S-B
- Q&A: What are the Jack Dimensions of the Round, Pipe Mount Swivel Jack # TJP-5002S-B
- Search Results: 1/2 wheel stud
- Search Results: 1/2x20 lug nuts
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: etrailer Ratchet Straps with Snap Hooks and Storage Bag - 2" x 20' - 3,333 lbs - Qty 4
- Video: Dexter Electric Trailer Brakes: The Breakdown
- Video: etrailer Electric Trailer Brakes Review
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Review of ABS Fasteners Trailer Door Latch - Latches - ABS99FR
- Video: In-Depth Review of the Locking Floor Mounted Storage Box for Enclosed Trailers
Jay C.
3/6/2013
I have dexter 5200 lb axles on my boat trailer. EZ lube design 25580 and 15123 bearings the seals that came out of it appear to be 10-10 seals but the spindle at the seal area measures 2.25 does this make it a 10-36 and was it misbuilt?