What is the Height of the Retracted TorkLift Glow Step Revolution

Question

Question:

Can you please tell me the height of the step when mounted under trailer, ie. how far down it hangs when mounted. Thanks in advance for your time.

asked by: Wayne

0

Expert Reply:

The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8102 have a height of 16-1/2" from the top of the mounting bracket to the bottom of the steps when fully retracted. I've attached a photo of this to give you a visual.

expert reply by: Erik B

0

click to enlarge

Answer 1

Hey Al! We do have some other steps that carry a lower cost for your 2018 Host Mammoth camper but the right fit depends on your entry height. The closest thing to the TorkLift GlowStep Revolution Scissor Steps #TLA8105 you looked at would be the…

view full answer...

Answer 2

The steps are approximately 19.415" in width for the MORryde Flip Tread RV Steps #MR42UR. To get wider steps you would need to size up in mounting width to something like the #MR28RR, but would need to have enough room for the steps to properly…

view full answer...

Answer 3

For your mounting height of 43 inches the best solution we have is the part #AS25 which has a mounting bracket height of between 40" - 48" which would be perfect for you. The additional step you mentioned would not interfere with that…

view full answer...

Answer 4

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

view full answer...

Answer 5

I spoke to my contact at Torklift and he informed me that the left to right width of the mounting bracket of the Torklift Glowstep Revolutions like the part #TLA8003 is 27-1/2 inches and the front to back depth is 12 inches. All of the Torklift steps…

view full answer...

Answer 6

The TorkLift GlowStep Revolution Scissor Steps #TLA8004 that you referenced are designed to fit entry heights on RVs that are between 32-1/2 and 44 inches which which might be a little higher than what you have on your 2018 Lance 1475 based on the…

view full answer...

Answer 7

While we do have some step solutions for you, none of the traditional style steps have the top step level with the mounting brackets when they are pulled out and/or a bracket mounting width of 29" wide (which is much wider than normal). For your…

view full answer...

Answer 8

The TorkLift Glow Step Revolution #TLA8102 are designed to work as a universal replacement option, and won't be coach specific. Additionally, we do not have information that tells us what steps fit on different coaches, so you will want to…

view full answer...

Answer 9

The install and removal of the step portion of the GlowSteps part #TLA7802 is pretty easy and does not require the use of any tools. Basically you just pull out cotter pin and then slide the pin out and you can remove the steps from the bracket. No…

view full answer...

Answer 10

I attached a picture of a similar set of the TorkLift GlowStep Scissor Steps as the part #TLA7802 that you referenced in the stowed position.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

What is the Height of the Retracted TorkLift Glow Step Revolution

Product Page this Question was Asked From

Continue Researching