Adding Electric Brakes to 3,500 lb Axles of LOOK Trailer
Updated 08/18/2020 | Published 08/14/2020
Products Featured in This Question
Question:
Hi, I want to install the electric drum brakes to LOOK Enclosed single Axle trailer below. 3,500lb Spring axle. Do you have a whole brake kit for this trailer? Im waiting your reply. Thanks!!
asked by: Kenji O
Expert Reply:
For 3,500 lb axles you will use 10 inch assemblies. My recommendation is the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These assemblies will work well for your axles. If you don't already have the hub/drum assemblies, then I recommend using the Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K.
This combination will work well and if you are adding brakes for the first time then you will just run # 10-1-1 wiring to each assembly. I've attached an article to assist.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness - Up to 4 Axles - Proportional
- Shop: Brake Controller
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Recommended Replacement Entry Door Latch for Fastec 23348 CR6
- Q&A: Recommended Braking Hub w/ a 5 on 4-1/2 Lug Pattern and Brake Assemblies for a Lippert 3,500 lb Axle