Parts Needed to Flat Tow 2019 Jeep Wrangler Unlimited with Remco Tow Bar

Updated 08/13/2020 | Published 08/12/2020

Products Featured in This Question

etrailer Invisible Base Plate Kit - Removable Arms

(742)

$479.80

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(481)

$1659.71

Blue Ox Base Plate Kit - Removable Arms

(4913)

$609.00

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3392)

$162.09

Question:

I am in the middle of buying a 1999 Country Coach Intrigue motorhome and it already has installed on the back a Remco system for hauling a vehicle behind you. Obviously if I can use that device, it will save quite a bit, what would I need to show you to help me buy the correct base plate / setup to connect to my 2019 Jeep Wrangler Unlimited Sport S factory plastic bumper I see several base plates on the website here and I have purchased various parts from eTrailer in the past so I feel confident in your recommendation. I am fine with buying the e-trailer labeled mounts vs other name brands, no loyalty and not seeing any Remco stuff out there?

asked by: Sammy H

Expert Reply:

Based on my research, your Remco tow bar should be compatible with all Blue Ox base plates so for your 2019 Jeep Wrangler Unlimited the correct base plate kit you'd want is the # BX1139.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.