Adding In-Bed Trailer Wiring in a 1994 Dodge Ram for a Camper

Updated 10/08/2012 | Published 10/07/2012

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(49)

$33.18

7-Way Connector 7' Loop

(157)

$56.51

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3448)

$119.73

Question:

Dodge ram 1994 3.9 Inbed camper hook up

asked by: Pat S

Expert Reply:

To add in-bed wiring for your truck bed camper I would need to know what type of connector the camper requires. A lot of campers have unique wiring connectors but I can tell you how to get some wiring in the bed and add a 7-Way blade style connector.

You will start by installing a 4-Way (unless the truck already has one) at the back of the vehicle. Use # C55317 that you have referenced. Then you will need to install # ETBC7 which will provide a 7-Way and 4-Way at the back of the truck. I have linked an FAQ and video that will help with this installation.

Once the ETBC7 is installed you can then use # 20027.

If you do not need a 7-Way and just need the basic light functions then you can leave the 4-Way and not install the ETBC7. Instead you would use a 4-Way extension like # 18045.

expert reply by: Michael H