Picking Out Replacement Leaf Springs for 1999 Fleetwood Prowler 26A

Question

Question:

I have a 1999 Fleetwood Prowler 26A toy hauler and it is needing new springs. The previous owner replaced some springs and they are all different sizes so we are not sure what size to replace with. The trailer is running dual dexter axles each with 5200 pound weight capacity. The brackets that mount to the frame measure 27 5/8 from center of hole to center of hole. It is a double eye let system with the equalizer in the middle. Any help would be appreciated.

asked by: Darrah

0

Expert Reply:

Based on the axle capacity and dimensions of the current springs the correct replacement would be the # e47SR.

expert reply by: Jameson C

0

Answer 1

With the 1/2 inch diameter wheel studs on your etrailer.com Idler Hub Assemblies #AKIHUB-545-35-K and the 15 inch steel wheels from the Loadstar Tire and Wheel #AM3S640DX, you are looking at a torque spec of 90-120 ft.-lbs for the lug nuts. I have…

view full answer...

Answer 2

The Dexter 8-286 is an obsolete 2800lb 10 x 1-1/2 inch hub that does not have replacement magnets made for anymore due to how long it's been out of production but you can replace the assemblies with the part #K23-472-473-00 as the only option.

view full answer...

Answer 3

Hi Phil, If the brake calipers list Kodiak and 250 then the Kodiak Ceramic Brake Pads #K250CP would be a compatible replacement. The backing plate color doesn't matter in this case, and is really just for branding. Outer pad wear means the…

view full answer...

Answer 4

For a set of brake assemblies that match the dimensions you listed you'd want the Dexter Electric Trailer Brake Kit #K23-472-473-00 as this is a 10 inch by 1-1/2 inch wide brake assembly set that fits 3,000 lbs axles like what you have.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Picking Out Replacement Leaf Springs for 1999 Fleetwood Prowler 26A

Product Page this Question was Asked From

Continue Researching