Replacement Hub and Drum Assembly for 1974 Tee Nee Boat Trailer with 7 inch Electric Brake Drum
Updated 07/21/2009 | Published 07/18/2009
Question:
I HAVE A4 BY 4 BOLT 7BRAKE DRUM WITH 1AXEL WITH 644643 INNER OUTER BEARINGS WILL YOUR P/N8-173-16UC3 ASSEMBLEY WORK BY REPLACEING YOUR SUPPLIED 644649 BEARINGS WITH MY NEW 644643 BEARINGS AND GREASE SEAL ORIG P /N WAS HD700ACU ASSEMB THANK YOU
asked by: ed d
Expert Reply:
The information you provided is great! From your part numbers I was able to find that the bearings would be a direct switch but that the grease seal and grease cap dimensions on the hub you have and the, 8-173-16UC3, 4 on 4 Trailer Hub / Drum Assembly are different. The, HD700ACU3, Complete hub and drum assembly is the part you would need for a direct replacement.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L44649 / L44649
- Standard Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Brake and Hub Compatibility for a 2,000-lb Trailer Axle with L44643 Bearings
- Q&A: What is the Best Surge Brake Actuator to Replace My Old Atwood Brake Actuator AT82543?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Hubs and Brakes for 2k Axle
- Q&A: Is the Dometic 310 Toilet the Same as the Powermax 310 Toilet?
- Q&A: Does Brake Output Wire on USCAR Harness Need To Be Hooked Up To Use Redarc Tow-Pro Link?
- Q&A: Can Trailer Brakes be Added to Time Out Motorcycle Trailer
- Q&A: Can 4.80-12 Size Trailer Tires Be Changed to 4.80-8 Size
- Article: Curt Echo Full Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle