Ball Mount For a 2013 Chevy Camaro with 1-1/4 Hitch
Updated 07/10/2020 | Published 07/09/2020
Question:
How much space do I need between the ball and my back bumper for a standard ball coupler like you would find on a uhaul trailer? I only have an inch or so between the two on my setup and I am curious if that is okay.
asked by: Kaileb
Expert Reply:
You are probably OK but if you are anything like I am it would be too close for comfort. I wouldn't want to take a chance at potentially causing any damage to my fascia. I recommend the Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs Item # C45015. The hitch on your vehicle is 8-1/2 inches from the center of the hitch pin hole to the outer most part of your fascia and 9-3/4 from the ground to the top inner most part of the receiver tube. This ball mount has an 11-5/8" long shank and a 5" rise. It will give you 2 inches of space between you fascia and ball and 13 inches from the ground which is what we recommend.
Product Page this Question was Asked From
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- Steel Shank - Gloss Black
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- CURT
more information >
Continue Researching
- Search Results: trailer jack
- Shop: Brake Controller
- Shop: Square A-Frame Jack w/ Footplate - Drop Leg - Sidewind - 28-3/4" Lift - 3,000 lbs
- Shop: Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
- Video: Hands-On with the Curt Class II Drawbar
- Video: What to Know About the 2" Hitch Ball
- Video: Let’s Check Out the 2" Hitch Ball
- Video: Feature Breakdown: Curt Class II Drawbar
- Video: Draw-Tite Drawbar for 1-1/4" Hitches Review
- Video: 2" Hitch Ball Spec Review
- Video: Feature Review 2" Hitch Ball
- Q&A: Will Curt Drawbar Clear Bumper On 2004 Chrysler Town And Country
- Q&A: Distance From Pin Hole to Ball Mount Platform of Curt Ball Mount C45014
- Q&A: Curt Ball Mount for 1-1/4 inch Hitch with More Rise and Length than C45520
- Q&A: Ground Clearance on a 2020 Hyundai Sonata w/ the Draw-Tite DT74MR Hitch Receiver
- Q&A: Does The Curt Trailer Hitch Receiver # C98DR for 2023 Hyundai Ioniq 5 Reduce Ground Clearance?
- Q&A: Trailer Hitch Ball Recommendation for Curt Ball Mounts C45015 and C45014
- Q&A: My Draw Bar Will Not Fit All the Way Inside My Draw-Tite Hitch 24812 on my Pontiac Vibe
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Shop: 2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Shop: Curt RockerBall Shock Absorbing 2" Hitch Ball - 3/4" Diameter Shank - Chrome - 3.5K
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-3/8" Long Shank - Chrome - 3,500 lbs
- Shop: Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
- Shop: Trailer Wiring
- Search Results: trailer brake controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: brake controller
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Hitch Ball Mount
