Wheel Size Upgrade for my Coleman Pop Up with a 5.70 x8 Current Tire SIze
Updated 07/09/2020 | Published 07/07/2020 >
Products Featured in This Question
Question:
What’s the biggest size rim I can go up to
asked by: Beryl C
Expert Reply:
The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel part # AM3H470 which has the 4 on 4" bolt pattern and the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel part # AM3H400 which has the 5 on 4.5" bolt pattern are both going to be about 2.4" bigger in diameter and 2.4" wider than you current wheel. If you have the space for 1.2" on the top and behind the tire plus still giving enough room for suspension travel you can upgrade.
From what I remember on my Coleman Pop Up there is a little room in there and this may be possible you'll just have to double check the measurements. We normally recommend 3-4 inches between the tire tread and underside of the fender and 1-2 inches between the inside sidewall and any part of the trailer.
Product Page this Question was Asked From
Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range E
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range E
- 205/65-10
- 10 Inch
- N - 87 mph
- Kenda
more information >
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Let’s Check Out the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Search Results: bt150a
- Search Results: short hub
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Video: A Closer Look at the Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel
- Search Results: hub washer
- Search Results: 1250 inch id trailer bearings races seals caps
- Search Results: hub nut
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Search Results: spare tire carrier
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: 1500 lb axle
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: Is There a Trailer Hub that Fits Spindle with 1.06 inch Bearing and 1.25 inch Grease Seal
- Q&A: Replacement Grease Seal Recommendation for a BT-150A Hub
- Q&A: Recommended Hub For Reliable BT150A Axle
- Q&A: Replacing Short Hubs On A 1996 EZ Loader Trailer With Straight Spindles

