Replacement 1 Inch Wide Tonneau Cover Velcro Fastener

Question

Question:

i have a Truxedo cover but the serial numbers have worn off, the velcro strips are 1 inch wide by 65 inches long and it looks like a adhesive back do you have any thing like what i am describing?

asked by: Bruce R

0

Expert Reply:

You can use the Replacement Truxedo Shur-Bond Velcro Brand Fastener for 8' Beds - 1" Width # TX1117877 which is the width you need and can be cut to length. It doesn't have the adhesive back but rather fits in the groove of the rail.

expert reply by: Jason S

0

Answer 1

Replacement Truxedo Shur-Bond Velcro Brand Fastener #TX1117876 is the same 1 inch width and it is the hook portion only just like #A60270 which is the Access replacement part. So it will fit its just that the 2 parts, the Tonneau cover and strip,…

view full answer...

Answer 2

In order to replace the hook and loop fasteners on a TruXedo Tonneau Cover you will need to know which exact model you have. If you have the TruXedo TruXport then you need part #TX1117877 but if you have the TruXedo Lo Pro then you need part…

view full answer...

Answer 3

The Truxedo replacement Velcro part #TX1117877 is 1 inch wide.

view full answer...

Answer 4

When replacing the Velcro on your TruXedo cover, you will just measure the actual hook Velcro portion. The Replacement Truxedo Shur-Bond Velcro Brand Fastener for 8' Beds - 1" Width #TX1117877 is what you want over the 1-1/4 inch wide…

view full answer...

Answer 5

From your pictures you have the original TruXedo tonneau cover. For your 2001 Ford F-F250 that means the replacement Velcro fastener is #TX1117877.

view full answer...

Answer 6

For your TruXedo Lo Pro QT tonneau cover on your 2011 Chevrolet Silverado with a regular bed, you're going to want the Replacement TruXedo Shur-Bond Velcro Brand Fastener for 6-1/2' Beds -1-5/16" Wide #TX1115174. These replacement Velcro…

view full answer...

Answer 7

I'm going to need you to measure the width of the Velcro strip of your Access tonneau cover. If the width his 1-1/2 inch you'd need the part #A30474, if it's 1 inch you'd want the part #A60270, or 1-1/4 inch part #A20790.

view full answer...

Answer 8

The only difference between the two is the length. The Truxedo Replacement Velcro #TX1117876 and #TX1117877 is that the TX1117877 is longer. It's for 8 foot truck beds while the #TX1117876 is for 6-1/2 foot beds.

view full answer...

Answer 9

The correct replacement Velcro for the Access Vanish tonneau covers is part #A60270.

view full answer...

Answer 10

We currently have a 1-1/4" Wide #TX1115173 and 1" Wide #TX1117877 Velcro strip for tonneau covers. These are the closest we have to the 1-1/8" measurement you have. These are both 8' long as they can be trimmed down to fit your…

view full answer...

Answer 11

We have Truxedo replacement Shur-Bond Velcro strips that are 1 inch wide with the part #TX1117877 which seems to be a better match for what you are in need of since you said you have 1 inch wide Velcro now and the strips you mentioned are 1-1/4 inch…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement 1 Inch Wide Tonneau Cover Velcro Fastener

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching